twitter Facebook Linkedin acp contact us

Pelican to showcase ATEX and US safety certified lighting solution at Intersec 2018

Security

Pelican, the global provider in the design and manufacture of advanced portable lighting, has introduced new products, aiming to ensure safety and security for professionals working in the oil and gas, fire and rescue, mining and other high-risk industries

A selection from more than 60 lights with European ATEX Certification and USA Safety approvals will be showcased at stand 3-D30 at Intersec from 21-23 January 2018, said the company.

With the new 9455Z0 RALS the company aims to provide a safe product in its category. The 9455Z0 is a compact 7.3kg portable area lighting system. Its LEDs radiate up to 1.600 lumens in high with a run time up to 10 hours. The system provides a wide beam spread of 125 degree of clean energy that illuminates the entire area preventing workplace injuries.

The 3315RZ0-RA LED torch is comprised with a lithium rechargeable battery that provides a life expectancy of more than 2,000 cycles, which is four times more than the 500 cycles that batteries usually last. With three lighting modes, it shines up to 132 lumens of light and delivers a run time up to 34 hours in a small compact design.

Certified to ATEX Zone 0, Pelican’s 3715Z0 ATEX Right Angle Torch features downcast LEDs for illuminating the path, with 189 lumens (high) and 90 lumens (low), and a flashing mode.

Human factors need to be taken into account when addressing safety. (Image source: Adobe Stock)

H.E. Abdullah Ali Bin Zayed Al Falasi, director general of Dubai Government Human Resources Department. (Image source: DGHR)

Source: SafeStart

The RealWear Navigator Z1. (Image source: RealWear)

The Al Khobar 2 SWRO desalination plant located in Saudi Arabia. (Image source: ACCIONA)

The new uvex phynomic cut glove range is manufactured in Germany using 3D hand ‘formas’ to mimic the contours of the hand. (Image source: uvex)

The GS700 incorporates the capability to detect H2, in addition to its existing ability to detect natural gas. (Image source: Teledyne Gas and Flame Detection))

The campaign focuses on keeping construction sites clean. (Image source: Adobe Stock)

The new uvex phynomic cut glove range is manufactured in Germany using 3D hand ‘formas’ to mimic the contours of the hand. (Image source: uvex)

QatarEnergy LNG's CEO at the Safety Day. (Image source: QatarEnergy LNG)

H.E. Abdullah Ali Bin Zayed Al Falasi, director general of Dubai Government Human Resources Department. (Image source: DGHR)

The Tab-Ex 04 Pro DZ2 / D2. (Image source: Pepperl+Fuchs)

The Al Khobar 2 SWRO desalination plant located in Saudi Arabia. (Image source: ACCIONA)

Source: SafeStart

Both municipalities said they were committed to advancing HSE practices in the country.

The project will have an expected annual processing capacity of 900,000 tonnes of waste, making it one of the region’s largest. (Image source: EWEC)

There are a diverse range of factors to consider from suspension, soft textile materials, vented or non-vented models, to heat regulation accessories, size and aesthetics. (Image source: MSA Safety)

The workshop focused on safety in construction as well. (Image source: ICC)

The new partnership will enable HMi Elements to tap into Cobic-Ex’s global network. (Image source: HMi Elements)

Sarah Hutcheon, product development manager, OPITO. (Image source: OPITO)

To improve differentiation, hard hats can be customised with different colours and logos. (Image source: MSA Safety)

The new harness comes with integrated trauma suspension relief straps in leg pads. (Image source: Guardian)

Human factors need to be taken into account when addressing safety. (Image source: Adobe Stock)