twitter Facebook Linkedin acp contact us

Eaton launches high temperature CCTV cameras at ADIPEC 2016

Security

Power management company Eaton announces that selected range of the Hernistm CCTV product range of hazardous & safe area camera stations has now been certified for +70 degrees Celsius operational temperature to meet the demands of the harshest high ambient temperature environments 

This enhancement is the result of extensive internal and external testing, and the products are now ATEX and IECEx certified with a 10 degrees Celsius increase on the previous upper ambient temperature of +60 degrees Celsius T4/T5 to +70 degrees Celsius T4 & +65 degrees Celsius T5 (configuration dependent).

The increased temperature ranges have now become common place in many Middle East specifications with the requirement of extended operating temperatures. This enhancement in the upper ambient temperature rating has been made possible by subtle product design optimisation, decreasing the operating temperature and increasing operating longevity.

The product is currently on display at ADIPEC 2016, taking place from 7-10 November in Abu Dhabi National Exhibition Centre. Product datasheets, certification and literature are now available from www.hernis.no.

Human factors need to be taken into account when addressing safety. (Image source: Adobe Stock)

H.E. Abdullah Ali Bin Zayed Al Falasi, director general of Dubai Government Human Resources Department. (Image source: DGHR)

Source: SafeStart

The RealWear Navigator Z1. (Image source: RealWear)

The Al Khobar 2 SWRO desalination plant located in Saudi Arabia. (Image source: ACCIONA)

The new uvex phynomic cut glove range is manufactured in Germany using 3D hand ‘formas’ to mimic the contours of the hand. (Image source: uvex)

The GS700 incorporates the capability to detect H2, in addition to its existing ability to detect natural gas. (Image source: Teledyne Gas and Flame Detection))

The campaign focuses on keeping construction sites clean. (Image source: Adobe Stock)

The new uvex phynomic cut glove range is manufactured in Germany using 3D hand ‘formas’ to mimic the contours of the hand. (Image source: uvex)

QatarEnergy LNG's CEO at the Safety Day. (Image source: QatarEnergy LNG)

H.E. Abdullah Ali Bin Zayed Al Falasi, director general of Dubai Government Human Resources Department. (Image source: DGHR)

The Tab-Ex 04 Pro DZ2 / D2. (Image source: Pepperl+Fuchs)

The Al Khobar 2 SWRO desalination plant located in Saudi Arabia. (Image source: ACCIONA)

Source: SafeStart

Both municipalities said they were committed to advancing HSE practices in the country.

The project will have an expected annual processing capacity of 900,000 tonnes of waste, making it one of the region’s largest. (Image source: EWEC)

There are a diverse range of factors to consider from suspension, soft textile materials, vented or non-vented models, to heat regulation accessories, size and aesthetics. (Image source: MSA Safety)

The workshop focused on safety in construction as well. (Image source: ICC)

The new partnership will enable HMi Elements to tap into Cobic-Ex’s global network. (Image source: HMi Elements)

Sarah Hutcheon, product development manager, OPITO. (Image source: OPITO)

To improve differentiation, hard hats can be customised with different colours and logos. (Image source: MSA Safety)

The new harness comes with integrated trauma suspension relief straps in leg pads. (Image source: Guardian)

Human factors need to be taken into account when addressing safety. (Image source: Adobe Stock)